_AlertIE

GreenTEG gSKIN® U & Flux Kit

Kit de mesure/enregistrement du coefficient U - Inclut un enregistreur avec 2 sondes de température et 1 capteur de flux thermique

Code Testoon : GREGSkin-U-Kit
Série : , temperature air surface audit
Référence commande : gSKIN® KIT-2615C (calibrated)
Marque : GreenTEG
U-Value and Heat Flux Measurement Kit.
- Calibrated Plug-and-Play solution.
- Measurement of U-value (W/(m²K)), heat flux (W/m²), and 2 temperatures (°C).
- Compatible with standards ISO 9869 and ASTM C1046 /ASTM C1155.
- Stores up to 2 million data points.
- Battery lifetime >1 month.
- High sensitive thermal detectors.
- Read-out software included.
- Compact design.
- USB interface.
- Comes with MOUNT-1235 (double sided adhesive tape).  

gSKIN® KIT includes (for more details consult the datasheets of the individual products): Sensor: gSKIN®-XO 67 7C (30mm x 30mm), Logger: gSKIN® DLOG-4231 and double sided mounting tape (MOUNT-1235).
TTC HT
Quantité
Expédié sous 48H
Devis EXPRESS pour cet article
Devis EXPRESS pour cet article
Description

U-Value Kit

 
 
U-value calibrated and plug-and-play solution allows to measure the thermal transmittance of a material or an assembly for the building industry. greenTEG’s unique solution allows to measure accurately U-Value (U-factor, Thermal transmittance), R-value and temperature of your building, wall, roof…

 

Do you need a U-value calculator?

  

Discover how to measure the U-value with greenTEG’s U-value and Heat Flux Measurement kit!

Our measurement-approach uses a heat flux sensor and two temperature sensors. This approach is standardized in ISO 9869, ASTM C1046 and ASTM C1155. This is the only method which delivers reliable quantitative in-situ information about a building envelope.

 

Features & Benefits

  • Calibrated Plug-and-Play solution.
  • Measurement of U-value (W/(m²K)), heat flux (W/m²), and 2 temperatures (°C).
  • Compatible with standards ISO 9869 and ASTM C1046 /ASTM C1155.
  • Stores up to 2 million data points.
  • Battery lifetime >1 month.
  • High sensitive thermal detectors.
  • Read-out software included.
  • Compact design.
  • USB interface.
  • Comes with MOUNT-1235 (double sided adhesive tape).

Specifications

  • gSKIN® KIT includes (for more details consult the datasheets of the individual products):
    • Sensor: gSKIN®-XO 67 7C (30mm x 30mm), Logger: gSKIN® DLOG-4231 and double sided mounting tape (MOUNT-1235)
  • Heat Flux Range Min / Max [W/m²]: ±300
  • Heat Flux Resolution [W/m²]: <0.22 Temperature Accuracy [°C]: ±0.5 (-10…+46 °C) ±2.0 (-55…+125 °C)
  • Min. Sensor Sensitivity (S) [µV/(W/m²)]: 7.0 (sensor calibration data already loaded onto logger for simple and fast plug-and-play measurements).
  • Data Storage Capacity [# measurements]: >2’000’000
  • Battery Lifetime [days]: >30 at lowest measurement frequency (2/d). Rechargeable.
  • Software: Installation – SW sent by email / via download link
  • Logger Dimensions (mm): 52 x 20 x 15
  • Bit Resolution [bits]: 12
  • Operation Modes: Autonomous / Live
  • Operating Temperature Range Min/Max [°C]: -40 / 100 (-25 / 65 for Logger)
  • Operating System: Windows 2000 / XP / Vista / 7 / 8
  • Calibration Accuracy [±%]: 3 (Sensor calibration data already loaded onto logger for simple and fast plug-and-play measurements).
  • Calibration Temperature Range Min/Max [°C]: -30 / 70
  • Heat Flux Sensor Cable Length [m]: 1.5 (with connector)
  • Temperature Sensor 1 / 2 Cable Length [m]: 5.0 / 1.0
  • Measurement Frequency: 1/s to 1/h
  • Computer Interface: USB

 

Use Cases

  • Building Insulation Evaluation
  • Building Envelope Performance Monitoring
  • Zero-energy Building Assessment
  • and more...

Spécifications
En Stock Non
Fichiers à télécharger