_AlertIE

TTI PL303P

Alimentation programmable simple avec régulation linéaire 0-30V, 0-3A, 90W

TTI
Code Testoon : TTIPL303P
Série : PL-P
Référence commande : PL303-P
Marque : TTI
Alimentation DC programmable à régulation linéaire simple sortie. fonction VSPAN, Analog/RS232/USB/LAN,LXI
Tension: 0-30V.
Courant: 0-3A.
Puissance max.: 90W.
Fonctions V-SPAN, S-LOCK.
Programmable par interface Analogique, RS-232, LAN (LXI), GPIB (en option).
TTC HT
Quantité
Expédié sous 1 semaine
Devis EXPRESS pour cet article
Devis EXPRESS pour cet article
Description
TTI  New PL-P series


 

Interfacing to every application
 

The New PL-P Series is the bus programmable version of the latest linear regulated power supply series from TTi.

The New PL-P series includes all of the manual control features of the New PL series. but adds comprehensive remote control facilities.

The ultra-compact rack-modular sizing makes it ideally suited to rack mounted system applications. while its user-friendly manual controls are retained for bench top applications.

Digital Interfaces

To meet the varying needs of today's engineers. a comprehensive array of interfaces is provided. RS-232. USB and LAN (Ethernet) with LXI support are provided as standard.

Each of the digital bus interfaces provides full control of voltage. current. and output on/off. plus read-back of voltage. current and status.

 

RS232 or RS423 interface            USB interface             LAN interface conforming to LXI

 

Analog Remote Control

Single output PL-P units include non-isolated analog voltage control of voltage and current. Analog control outputs are also incorporated to enable easy parallel connection of multiple units in a master-slave configuration.
Terminals for remote on/off control are also provided.

GPIB (option G)

Further versions of the products are fitted with a GPIB (IEEE-488) interface.

These models retain all of the other interfaces (Analog. RS232. USB and LAN/LXI) giving them even greater flexibility.

Rear Terminals and Rack Mounting

Power and sense terminals are duplicated on the rear panel for rack mount applications or other situations where rear connection is more appropriate.

An optional rack mount kit is available which accepts up to four single output units. or a combination of single and dual output.

 

Digital Remote Control

To meet the varying needs of todays engineers. a comprehensive array of interfaces is provided. RS-232. USB and LAN (Ethernet) with LXI support are provided as standard. with GPIB an option.

Each of the digital bus interfaces provides full control of voltage. current. and output on/off. plus read-back of voltage. current and status.  The interfaces are opto-isolated from the output.

 

Command Set and IVI Driver

The basic command set for the New PL-P series is compatible with both the original PL-P series and the QL-P series.

An IVI driver for Windows is supplied. This provides support for common applications such as LabView*. LabWindows* and HP-VEE*.

 

RS-232

An RS-232/RS-423 interface is provided for use with legacy systems. This type of serial interface remains in common useage and is perfectly satisfactory for the control of power supplies because data speed is not an issue.

 

USB

USB provides a simple and convenient means of connection to a PC and is particularly appropriate for small system use.

A USB driver is provided suitable for Windows* systems.

 

LAN-Ethernet with LXI

The LAN interface uses a standard 10/100 base-T Ethernet hardware connection with ICMP and TCP/IP Protocol for connection to a Local Area Network or direct connection to a single PC.

This interface supports LXI and is the most appropriate for larger system use because of its scalable nature.

LXI Compliance

The LAN interface is compliant with LXI-C. LXI is the next-generation. LAN-based modular architecture standard for automated test systems managed by the LXI Consortium. and is expected to become the successor to GPIB in many systems.

 

GPIB (G models only)

These versions of the products are fitted with a GPIB (IEEE-488) interface. PL-P(G) models retain all of the other interfaces. giving them even greater flexibility.

 

Analog Remote Control (Single output models only)

Single output PL-P units include non-isolated analog voltage control of voltage and current using a 0V to 5V or 0V to 10V signal.

Analog control outputs are also incorporated to enable easy parallel connection of multiple units in a master-slave configuration.

Remote On/Off (Single output models only)

A terminal for remote on/off control is also provided. This can be operated using a TTL/CMOS control signal. or using a relay.

 

Parallel Connection

Single output units can be connected together in a parallel configuration by connecting Vout and Iout on the Master unit to CV and CC on the Slave units.

Thus. for example. four PL155-P power supplies could be parallel connected to provide currents up to 20 amps.

Spécifications
Garantie Constructeur Standard 1 An
622-Précision (V) 0.05%
755-Format - taille "Standard - de table"
623-Erreur sur le courant 0.3%
023-Résolution en tension 1mV
053-Résolution en courant (A) 0.1mA (0.01mA gamme 500mA)
068-Puissance Max. 90 W
057-Tension max. de sortie 30 V
058-Courant max. de sortie 3 A
056-Nombre de sorties Simple
717-Programmable Oui
501-Interfaces de programmation Analogique | RS-232 | GPIB
055-Mode de fonctionnement (Type) Mode parallèle
621-Ondulation et bruit nc
En Stock Non
120-Surtension de Sécurité CAT II
036-Caractéristiques Supplémentaires
  • V-SPAN
  • S-LOCK
  • Interfaces RS-232, USB, analogique, LAN/LXI.
132-Livré avec Manuel d'utilisation, cordon d'alimentation
035-Dimensions (HxLxP) (mm) 107x131x288 mm (1/4 rack 3U)
013-Poids Net 4.5 kg
Articles déjà vus