Fluke PRV240 FS
Source de référence pour contrôler les testeurs FieldSense
Spécialement conçu pour les nouveaux T6-600 et T6-1000, cette source embarque la technologie FieldSense permettant le test des fonctions de mesure de tensions, courant et fréquences sans contact.
Compatible également avec les multimètres (haute impédance uniquement) et pinces de courant à mâchoires ouvertes (T5-600 et T5-1000).
Outil indispensable si votre application, norme....vous demande un contrôle de votre testeur électrique avant et après chaque branchement au circuit à tester.
Fluke PRV240FS Proving Unit
For use with T6 Electrical Testers. DMMS and current clamps
Unique. compact. convenient
The Fluke PRV240FS Proving Unit is a portable. pocket-sized. battery-powered voltage source. It is specifically built to prove the functionality of the FieldSense measurement on the T6 electrical testers. It also provides ac and dc voltages for other HiZ instruments in your tool box.
Designed for safety and compliance
The Fluke PRV240FS provides a safe method to verify that your T6 electrical tester is operating properly before you conduct any live tests. The concept of “Test Before Touch” (TBT) involves testing your T6 against a known live source before and after the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement. Verify your test tool without unnecessary exposure to shock and arc flash. Using the PRV240FS reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification of your tester or multimeter before test before TBT are performed. PPE is still needed for absence of voltage testing when appropriate.
Key benefits
- Using the PRV240FS reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment.
- Can prove functionality of the FieldSense measurement on the T6 electrical testers
- Sources both ac and dc steady-state voltage—supplies 240 V dc/ac.
- A single switch and a set of LEDs indicate functionality of both the FieldSense “no-test-lead” voltage measurement capability. plus standard ac and dc measurements with test leads. This unit is a simple-to-use solution for complying with TBT verification of your test tools.
- Compatible with high impedance multimeters or clamp meters.
- Voltage is sourced through a central hub designed to test the T6 FieldSense open fork. as well as through recessed contacts that are activated when test probes are inserted to avoid accidental contact
- Includes TPAK magnetic hanging strap
- Long battery life—2000 tests per set of four AA batteries (10 second test average)
Garantie Constructeur Standard | 1 An |
En Stock | Non |
035-Dimensions (HxLxP) (mm) | 117x74x45 mm |
013-Poids Net | 320 g |